Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Dana, NC

Holmes Garage Door Garage Door Panel Replacement in Dana, NC

Dented, cracked or rusted sections replaced or repaired to match your door. Typical cost $300-$900.

Need Holmes Garage Door garage door panel replacement in Dana, NC? We diagnose the problem, give you a price before any work starts, and finish most jobs in a single visit. Dented, cracked or rusted sections replaced or repaired to match your door. Our technicians service Holmes Garage Door garage doors regularly and know where the model and date labels are, which makes ordering the right part quicker.

When to call for Holmes Garage Door garage door panel replacement

  • Dents or creases from a vehicle, ball or hail
  • Cracked or split sections
  • Rust coming through the paint, often on the bottom panel
  • Panels bowing so the door binds

Why this happens

  • Impact from cars, equipment or storms
  • Moisture rusting the bottom panel
  • Wood panels rotting or splitting
  • An unbalanced door bending the top section

What you can check yourself

  • Note the brand and model from the label on the door's edge or inside face.
  • Photograph the damage. It helps us match the panel.
  • Check whether the damage spreads across the hinge line.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

What happens during the visit

  1. Identify the door's brand, model, design and color
  2. Confirm the panel is still available, or price a replacement door if it isn't
  3. Remove the damaged section safely
  4. Install and align the new panel and hardware
  5. Rebalance the door, since panel weight can change

Discontinued panels can be hard to match. If several sections are damaged, a new door is often the better value.

How much does Holmes Garage Door garage door panel replacement cost?

$300-$900Typical range, parts & labor
1-3 hours once the panel arrivesTypical time on site

What moves the price:

  • Door size and weight (single or double, steel or wood)
  • Which parts need replacing and whether they are in stock
  • Spring type and cycle rating
  • Emergency or after-hours timing

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Holmes Garage Door services

Serving Dana, NC and nearby towns

In North Carolina, steel panels rust where the paint has been scratched or dented, and wood doors swell, warp or rot if the finish isn't kept up.

Parts of North Carolina are exposed to hurricanes and tropical storms. A garage door is often the largest opening in a home, so wind-rated doors and reinforcement kits matter here, and building codes in coastal areas may require them when a door is replaced.

Besides Dana (ZIP code 28724), we handle Holmes Garage Door garage door panel replacement in East Flat Rock (4.3 mi), Fruitland (4.8 mi), Edneyville (4.9 mi) and Hendersonville (4.9 mi). Call (833) 435-8883 to book a visit in Dana.

Holmes Garage Door Garage Door Panel Replacement: frequently asked questions

How much does Holmes Garage Door garage door panel replacement cost in Dana, NC?

Holmes Garage Door Garage Door Panel Replacement typically costs $300-$900 including parts and labor, and usually takes 1-3 hours once the panel arrives. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Holmes Garage Door garage door panel replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Holmes Garage Door garage door panel replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Holmes Garage Door warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where North Carolina or Dana requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my garage door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Dana, NC

Haas Door Commercial Garage Door Repair

Repairs for commercial sectional, overhead and service doors.

Typical $250-$1,000

Sommer Opener Circuit Board Replacement

Sommer openers, made in Germany, put the motor on a carriage that travels along the rail instead of hanging from the ceiling, so servicing them is a little different from a conventional opener.

Typical $175-$400

Northwest Door Weather Seal Replacement

New bottom seals, threshold seals and perimeter stops to keep out water and drafts.

Typical $100-$300

Linear Garage Door Opener Installation

Linear openers and remotes are now part of Nice North America. Linear's MegaCode remotes are common on older openers and gate systems.

Typical $350-$800

Holmes Garage Door Garage Door Installation

New steel, insulated, wood-look and carriage-style doors, measured and professionally installed.

Typical $1,200-$4,500

Overhead Door Rolling Fire Door Inspection & Drop Testing

Annual drop testing and inspection of rolling fire doors.

Typical $150-$500

Holmes Garage Door Weather Seal Replacement

New bottom seals, threshold seals and perimeter stops to keep out water and drafts.

Typical $100-$300

Genie Opener Circuit Board Replacement

Genie is the residential opener brand of the Overhead Door Corporation. Genie openers use Intellicode rolling-code remotes, Genie is one of the few brands still offering screw-drive openers, and newer models connect to the Aladdin Connect app.

Typical $175-$400

Wayne Dalton Torsion Spring Replacement

Wayne Dalton is part of the Overhead Door Corporation. Many Wayne Dalton doors use the TorqueMaster spring system, with the springs sealed inside the torsion tube, so spring work needs TorqueMaster parts and a different procedure.

Typical $200-$450

Windsor Door Weather Seal Replacement

New bottom seals, threshold seals and perimeter stops to keep out water and drafts.

Typical $100-$300

Overhead Door Extension Spring Replacement

Overhead Door traces its roots to C.G. Johnson, who invented the upward-acting garage door in 1921. The company builds residential and commercial doors and openers.

Typical $150-$350

Haas Door Torsion Spring Replacement

Haas Door, based in Wauseon, Ohio, makes residential and commercial sectional and rolling doors.

Typical $200-$450

Garage door stuck, noisy or broken?

Talk to a garage door technician in Dana, NC now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote